Project Description
IKMH–4A
IKMH-4A is designed for large-size venues. It has very high power/size ratio thanks to its construction.
It is ideal for Large venues, Theatres, Large Concert Halls, etc.
It uses “Powersoft” amplification and DSP.
Low-Mid section contains twelve 8” speakers, Mid-High section contains five 1,75” compression drivers summing in total 4000W of power.
| ACOUSTICS | |
| POWER HANDLING | 3600W + 400W |
| MAX POWER | 5000W + 700W |
| IMPEDANCE | 12X8 OHMS + 5X16 HOMS |
| COVERAGE | H 120º V 20º |
| FRECUENCY RANGE | 100 Hz ? 20 Khz +/- 3dB |
| SPL 1W/1MT | 105 dB ( low-mid ) 113 dB ( higt ) |
| MAXIMUM SPL | 133 dB CONTINUOS ? 139 dB PEAK |
| CROSS OVER | |
| TYPE | DSP CONTROLLED PRESET SPEAKERS |
| FREQUENCY | 1,2 KHz MINIMUM |
| TRANSDUCERS | |
| LOW ? MID FREQUENCY | 12X8? NEODYMIUM |
| HIGH FREQUENCY | 5X1,75? NEODYMIUM |
| AUDIO INPUT | |
| CONNECTORS | MALE + FEMALE PARALLEL 3 POLES BALANCED XLR |
| WIRING | PIN1 = GROUND / PIN2 = HOT / PIN3 = COLD |
| AUDIO OUTPUT | |
| CONNECTOR | MALE + FEMALE PARALLEL 3 POLES BALANCED XLR |
| WIRING | PIN1+ = CH1+ / PIN1- = CH1- / PIN2+ =N.C. / PIN2- = N.C. |
| POWER INPUT | |
| CONNECTOR | 1 X POWERCON IN 1x POWERCON OUTPUT |
| AMPLIFIERS | |
| TYPE | 1 MODULE CLASS D ? DSP CONTROLLED |
| SUBWOOFER POWER | 500 WATT X 8 CH |
| PROTECTIONS | DYNAMIC LIMITER, OVER CURRENT, OVER TEMP, SHORT CIRCUITS |
| AC POWER | |
| OPERATING RANGE | STANDARD 210 ? 240 Vac 50Hz ( STANDARD ) |
| MAX CONTINUOS AND BURST CURRENT | STANDARD 12A (>10SEC) ? 24A (>1 SEC ) |
| PHYSICAL | |
| MEASURES | 112 X 60 X 18 CM |
| WEIGHT | 53 Kg |
Large-Size venues
Indoors and Outdoors concerts
