Project Description
MAK FULL ZERO
FULL ZERO speaker is very difficult to classify. It is an active, Full Range speaker designed with a very special purpose. Mainly, it was designed to offer clear sound, high power and exceptional bass response in applications where the use of subwoofers is not available or not recommendable. We are comfortable to say that it is one of the few REAL Full Range speakers on the market. Its sound covers the whole range delivering clear and powerful performance produced by its 12” Neodymium speaker and one 2,5” HF driver.
| ACOUSTICS | |
| POWER HANDLING | 1.000W + 80W |
| MAX POWER | 1050W + 1050W |
| IMPEDANCE | 1 x 8 OHMS + 1 x 8 HOMS |
| COVERAGE | H 60º V 40º |
| FRECUENCY RANGE | 40 Hz ? 20 Khz +/- 3dB |
| SPL 1W/1MT | 128 dB ( low-mid ) 129 dB ( higt ) |
| MAXIMUM SPL | 131 dB CONTINUOS ? 134 dB PEAK |
| CROSS OVER | |
| TYPE | DSP CONTROLLED PRESET SPEAKERS |
| FREQUENCY | 1,2 KHz MINIMUM |
| TRANSDUCERS | |
| LOW-MID FREQUENCY | 1 x 12? NEODYMIUM |
| HIGH FREQUENCY | 1 x 2,5? NEODYMIUM |
| AUDIO INPUT | |
| CONNECTORS | MALE + FEMALE PARALLEL 3 POLES BALANCED XLR |
| WIRING | PIN1 = GROUND / PIN2 = HOT / PIN3 = COLD |
| AUDIO OUTPUT | |
| CONNECTOR | MALE + FEMALE PARALLEL 3 POLES BALANCED XLR |
| WIRING | PIN1+ = CH1+ / PIN1- = CH1- / PIN2+ =N.C. / PIN2- = N.C. |
| POWER INPUT | |
| CONECTOR | 1 X POWERCON IN 1x POWERCON OUTPUT |
| AMPLIFIERS | |
| TYPE | 1 MODULE CLASS D ? DSP CONTROLLED |
| POWER | 2 x 1050 WATT @ 8 CH |
| PROTECTIONS | DYNAMIC LIMITER, OVER CURRENT, OVER TEMP, SHORT CIRCUITS |
| AC POWER | |
| OPERATING RANGE | STANDARD 90 ? 265 Vac 50Hz ( STANDARD ) |
| MAX CONTINUOS AND BURST CURRENT | STANDARD 12A (>10SEC) ? 24A (>1 SEC ) |
| PHYSICAL | |
| DIMENSIONS | 75 x 35 x 22 cm |
| WEIGHT | 30 Kg ( 77 lbs ) |
