MAKS8A 2018-08-23T08:25:00+00:00

Project Description

MAKS8A

MAKS8A is an active subwoofer based on double 21” speaker (1800W rms each), incorporating “Powersoft” 4-channel, class-D amplifier, controlled by our 24-bit DSP. Four selectable presets are enabling its use in wide variety of applications. It was designed to confront Large-scale venues where high performance and low end frequency response is required.

MAKS8A
ACOUSTICS
POWER HANDLING 1.800w x 1.800w @ 8?
MAX POWER 3.000w + 3.000w @ 8?
IMPEDANCE 2 x 8?
COVERAGE OMNI
FREQUENCY RANGE 25 Hz ? 150 KHz +/- 3dB
SPL 1W / 1 MT 95 dB
MAXIMUM SPL 135 dB CONTINUOS ? 141 dB PEAK
CROSS OVER
TYPE DSP CONTROLLED PRESET RELATING
FREQUENCY 150 Hz
TRANSDUCERS
LOW-MID FREQUENCY 2 x 21? NEODYMIUM
AUDIO INPUT
CONNECTORS MALE + FEMALE PARALLEL 3 POLES BALANCED XLR
WIRING PIN1=GROUND / PIN2=HOT / PIN3=COLD
AUDIO OUTPUT
CONNECTOR MALE + FEMALE PARALLEL 3 POLES BALANCED XLR
POWER INPUT
CONNECTOR 1x POWERCON IN 1x POWERCON OUTPUT
AMPLIFIERS
TYPE 1 MODULE CLASS D ? DSP CONTROLLED
SUBWOOFER POWER 2 x 3.000WATT @ 8?
PROTECTIONS DYNAMIC LIMITER, OVER CURRENT, OVER TEMP, SHORT CIRCUITS
AC POWER
OPERATING RANGE STANDARD 90 ? 265 Vac 50Hz (STANDARD)
MAX CONTINUOS AND BURST CURRENT STANDARD 12A (>10sec ) ? 24A (>1sec )
PHYSICAL
DIMENSIONS 120 x 58,5 x 84 cm
WEIGHT 100 Kg

Галерия

Продукти от същата категория